multi-component High Pressure Foaming Machine

Description:

Specifications
multi-component High Pressure Foaming Machine have used forautomotive steering wheel, dashboards, seat cushion,

Specifications

multi-component High Pressure Foaming Machine have used forautomotive steering wheel, dashboards, seat cushion, headrestetc.

 

HPM50/50/20 Three components High Pressure Foaming Machine

 

The HPM50/50/20 machine is special designed for automobile seatcushion, steering wheel foaming, equipped with 3 components tankand metering system ( polyol 1, polyol 2 and isocyanate1) and 1 setof 4-components L-type dual-chamber mixing head. The component flowis controlled by flowmeter so that you can get different mixingratio for the dual-hardness parts.

 

Main Technical Parameter

 

* Type: HPM50/50/20;

* Suitable foaming system: flexible foam, integral skinfoam,

* Suitable material viscosity 22 degree Centigrade:

Polyol1: max. 3000 mPa.s,

Polyol2: max. 3000 mPa.s,

Isocyanate: max. 1000 mPa.s,

* The flow capacity ranges: 100~950g/s,

* Mixing ratio range adjustable ~ 2-2.5:1,

* Pouring programming time: 0.50~99.99sec

* Water supply required: processed running water, flow capacity:300L/min. Brings R1" the ball valve;

* The compressed air supply required: 0.7 Mpa, flow capacity:600NL/min. Dry, oil-less , the dew point -20 degree Centigrade;with the 1.0Mpa pressure relief valve and R3/4 " the ballvalve;

* Power supply required: 3× 380V/50HZ±10% or as customer''slocal condition,

Total power: ~57kw,

Control voltage: AC110V/DC24V;

* Weight: ~ 3, 700kg,

* Floor space: ~4, 100mm×6, 000mm,

multi-component High Pressure Foaming Machine